Yeti 1250 Solar Generator

$1,599.95
(No reviews yet) Write a Review
SKU:
SOL-YET-1250
Condition:
New

Yeti Solar Generator

  • Best for safe, silent power generation
  • Use indoor or outdoor to backup critical appliances including refrigerators, freezers & home health care equipment like a CPAP machine
  • Store 1250 watts of power
  • Your ideal backup emergency power generator.No noise, no fumes, no gasoline, no wasted power
  • Charge from the sun with solar panels or from the regular wall outlet.
  • Ideal for: Lights, Phones, Tablets, Laptops, DSLR Cameras, CPAP, TV, Fridge
  • Crank Out Big Power Silently
  • Silent power generation
  • Safe to operate indoors. No fumes or fuel to store.
  • Rated for continuous duty.
  • Easy-to-use & monitor performance
  • Scalable and go where you want to go
  • Battery Capacity: 1200Wh, 100Ah, (12V)

    Includes:
  • 1 x Yeti 1250 Solar Generator
  • 1 x Roll Cart

    Approx. Charge Times:
  • AC Wall Charger (80W) included 16-20 hours
  • Goal Zero Boulder 30 Solar Panels x 2 (60W), not included 20-24 hours
  • Car Charger (30W), not included 40+ hours

    INPUTS
  • 2 x 8mm Charge Ports 16-20V, 10A max (200W) each
  • Power Pole Charging Port 16-48V, 20A max (250W)

    OUTPUTS
  • 3 x AC standard US outlets 110V AC 60Hz pure-sine wave, 1200W max total continuous, 1500W max short-duration
  • Female 12V port 111-14V, 10A max (120@), unregulated
  • 2 x 6mm 12V ports 11-14V, 6A max each (72W), unregulated
  • 12V Power Pole port 12-14V, 30A max (360W), unregulated
  • 3 x USB ports 5V, 1.5A mx (7.5W) each, regulated

    INTERNAL
  • Battery Type Lead-acid (AGM)
  • Battery Capacity 1250Wh (12V, 100Ah)
  • Battery voltage range 11-14.8V
  • Life Span Hundreds of cycles
  • Fuse 200A (4x50A fuses in parallel)
  • Inverter 1200W pure-sine wave inverter
  • Charge Controller 20A MPPT

    GENERAL
  • Shelf Life Charge every 3-4 months
  • Weight 116 lbs
  • Dimensions 16 x 11.5 x 14.5 in (410 x 305 x 370 cm)
  • Warranty 12 Months
  • Certifications FCC, CE
  • Operating useage Temp. 20-105 F (6-40 C)
  • Optimal storage temp. 70 F (21 C)
  • 6mm Tool Included

Charging

There are 3 ways to charge your Goal Zero Yeti 1250:

The Sun
The Goal Zero Yeti 1250 can be charged by connecting a compatible solar panel

Wall
The Goal Zero Yeti 1250 can be recharged from a regular wall outlet in about 18 hours. You can charge your Yeti with solar panels, and a wall charger at the same time.

Car
Although not the most ideal recharge time, the Goal Zero Yeti 1250 can also be charged by plugging into your car 12V adapter in about 44 hours. You will need to purchase an 8.0mm to 12V Charger.

How the Goal Zero Yeti 1250 Works
* Full-size refrigerator runtimes from the Yeti 1250 are dependent on several factors, including the year, make and model of your refrigerator, as well as its volume, fullness and usage. We actively test a variety of refrigerators to determine an average runtime. For the longest runtimes and to optimize performance, we suggest limiting the opening and closing of refrigerator doors when powering from the Yeti 1250.

 

FREQUENTLY ASKED QUESTIONS

  • Q: What type of battery is in the Yeti 1250?
  • A: The Yeti 1250 uses a Group 31, 12V, 100Ah, sealed lead-acid battery (AGM), similar to what is found in your car. Here are some basic facts about AGM batteries:

    *AGM batteries should be kept full at all times. This means you should leave your Yeti 1250 plugged into a power source at all times, especially during storage.

    *AGM batteries last longer if you do not drain them completely. This stems from the "battery memory myth" in old rechargeable batteries.
  • Q: How do I know if my device will work with the Yeti 1250?
  • A: First, you'll need to determine the amount of power your device requires. This may require some research on your end, a good Google search or examining the user guide for your device should suffice.
  • Q: Can I replace the battery in the Yeti 1250?
  • A: Yes, the battery inside is extremely easy to replace.
  • Q: How do I know if my Yeti 1250 is charged?
  • A: To check the charge level of the Yeti 1250, refer to the LCD battery display. When lit up, you'll see a battery outline with five segments, indicating the current charge level. You can turn the Battery Display by pushing the Master Power Button. It is OK to use your Yeti 1250 even when it's not fully charged.

Powering

THE GOAL ZERO YETI 1250 POWERS YOUR DEVICE IN 3 WAYS:

USB
Three 2.1A USB Outlets. The USB port best charges all your large sized or multiple USB powered devices.

12V
The 12V best charges all your 12V powered devices.

AC Inverter
Plug in your device just as you would the wall. There are three AC Outlets (pure-sine wave)

WHAT TO POWER FROM THE GOAL ZERO YETI 1250:

Smartphones, MP3 Players, Digital Cameras, E-readers, Tablets, Lights, 12V Appliances, Laptops, CPAP, Display Monitors, Appliances, Fridges etc.

HOW LONG WILL IT TAKE TO CHARGE YOUR DEVICE FROM GOAL ZERO POWER PACKS?

It takes the same amount of time to charge your device from a Goal Zero power pack as it does from the wall.

BEST-USE STRATEGY:

When charging gear with the Yeti 1250, take note of the LCD Battery Display. If you plug in devices that have a high power requirement (a large refrigerator), the charge level of the Yeti can drop very quickly and you may not get exactly 1250Wh of power. On the flipside, if you're recharging devices that draw power more slowly (a small TV), you will get closer to 1250Wh. If you're experiencing shorter run times, you might want to check the device's power requirements.

COLD WEATHER USAGE:

Cold temperatures (below freezing) can impact the Yeti's battery capactiy. If you'll be living off-grid in sub-zero conditions, we recommend keeping your Yeti 1250 in an insulated cooler, and connected to a power source (solar panels). The natural heat generated by the Yeti 1250 contained in an insulated cooler will keep battery capacity at its highest.

STORAGE AND DOWNTIME MAINTENANCE

Having your Yeti 1250 connected to a power source, like a solar panel or wall outlet, between adventures or while in storage keeps its battery healthy and topped off. This prolongs battery life and will ensure your Yeti 1250 is charged and ready to go all day, every day.

If you can't keep the Yeti 1250 plugged into a power source during storage, fully charge your Yeti 1250 every 3 months and store in a cool, dry place. Failure to maintain the Yeti 1250 by following these steps can result in battery damage which will void the product warranty.

CHAINING YOUR YETI 1250

Looking for more power from your Yeti 1250? You can extend the run time of your Yeti 1250 by connecting it to additional 12V, 100Ah batteries. The connector on the back of the Yeti 1250 is an Anderson Power SB175. Connect only 100Ah, 12V lead-acid batteries (or similar, 175Ah Max) batteries to the Yeti 1250.

When additional batteries are chained to the Yeti 1250, you will experience increased charge times - this is a result of having to charge up the chained batteries in additional to the Yeti 1250.

 

 

Charge Times

  • Wall Charger (72W): 18 hours
  • Car Charger (30W): 44 Hours
  • 2 x Boulder 30: 40-80 Hours
  • 3 x Boulder 30: 27-54 Hours


Battery Details

  • Cell Type: AGM Lead Acid
  • Peak Capacity: 1200Wh (12V, 100Ah)
  • Lifecycles: hundreds of cycles
  • Shelf-life: Keep plugged in, or charge every 3 months
  • Internal Battery Dimensions: 12.9 in.L x 6.8 in W x 8.7in H (Group 27)
  • Fuses: 200A (4x 50A fuses in parallel)
  • Management system: MPPT charge controller, low battery protection

Ports

  • USB port (output): 5V, up to 2.1A (10.5 W max), regulated
  • 6mm port (output, 6mm): 12V, up to 10A (120W max)
  • 12V car port (output): 12V, up to 10A (120W max)
  • 12V Power Pole Port (output): 12V, up to 33A (400W max)
  • AC inverter (output, pure sine wave): 110VAC 60Hz, 10A (1200W continuous, 1500W surge max)
  • Charging port (input, 8mm): 16-48V, up to 10A (160W max)
  • Power Pole charging port (input): 16-48V, up to 20A (240W max)
  • Power Pole chaining port: 12V, up to 180A (2100W max)

General

  • Product SKU: 31901
  • Chainable: Yes
  • Weight: 103 lbs (46.7 kg)
  • Dimensions: 11 x 16 x 14.5 in (27.9 x 40.6 x 36.8 cm)
  • Operating usage temp.: 32-104 F (0-40 C)
  • Certs: CE, FCC, ROHS
  • Warranty 12 months
  • User Guide: Download PDF